64
c) Deleting registered radio remote controls
• Press the lower key ”Lock” for approx. 2 seconds.
+
If you press the key ”Lock” again for a longer period (press the key
for about 2 seconds) the delete process will be terminated without
a memory slot being deleted (e.g. if you have pressed a key by
mistake).
If no key on the door lock actuator is pressed for 3 minutes after the
menu has been retrieved, the menu is aborted automatically without
deleting a memory slot.
• „X” appears in the display, the symbols for radio reception and ”Lock” fl ash.
• Now take the ”Master” remote control and press a desired key for approx. 1
second till the ”X” disappears and the fi rst storage place appears.
• Select the memory slot to be deleted, e.g. ”3” with the ”Lock” or ”Unlock”
buttons.
+
Please note:
Only occupied storage places appear. When no radio remote control
is registered (delivery status) or the „Master“ remote control has been
programmed, then the display shows the message „MASTER“.
At this point, you cannot delete the „Master” remote control (storage
place ”1“). See also chapter 14.
• To delete the selected memory slot, press the small button “Setup” on the
door lock actuator briefl y.
• If the delete process has been successfully, the LC display will display ”OK”
and terminate the menu with three short signal tones.
+
The door lock actuator can no longer be operated with the deleted
radio remote control.
If a lost or stolen radio remote control crops up again, it can of course
be registered again under point b) ”register radio remote control on
the door lock actuator” and used as usual.
As it is not possible to copy the radio remote control, there is nothing
against continuing to use it quite normally!
Содержание CFA 1000
Страница 151: ...151 ...