Abus CFA 1000, Руководство по эксплуатации

Страница: 55 / 152

55
c) LED Signal Lamp and ”KM 300 RI” Interface
There are two small sockets underneath the door lock actuator. The LED signal lamp can be
attached to the two-pin socket; the four-pin socket serves to connect the “KM 300 RI” interface.
Both the signal lamp and the interface are not included in the ”CFA 1000” scope of delivery and
may be purchased separately.
Two-pin connection Four-pin connection for
for LED signal lamp ”KM 300 RI” interface
To mount the signal lamp, it may be necessary to drill a hole for guiding through the
cable.
If you live in a tenanted flat, ask your landlord or the house management whether this
is permitted or not. Otherwise you can be made liable for the damage to the door.
Evtl. The signal lamp could possibly be affixed to the interior of a glass surface on the
door leaf.
Insert the small plug connector of the signal lamp to the bottom of the door lock actuator. Do not
exert any force.
The signal lamp enables optimum acknowledgement of the radio commands of the radio remote
control. In this manner, you will continue to receive visible feedback about the current activities
of the door lock actuator.
The following information is provided by the signal lamp:
Short lighting up of the lamp
u
Radio command received, execution begins
Flashing
u
Drive running
1 x longer flash
u
Stop locking
2 x shorter flashing
u
Locking competed
The plug of the ”KM 300 RI” interface also only fits into one position of the four-pin socket. Do
not use any force when plugging in the device, otherwise the connection of ”KM 300 IQ+” will be
damaged, thus losing the guarantee / warranty!