
65
64
9.3 PARALLEL SKI HOLDER WITH THE SKIGRID PRO
a
The SkiGrid Pro is not included in the package
and must be purchased separately. It lets you
fasten the skis on the backpack in parallel. To do
this, you must pull down the lower loops of the
ski fastenings on the left and right flaps. The two
belt bands that come with the SkiGrid Pro are
fastened on the flaps at the upper end. The skis
must now first be slipped into the lower loop.
Then close the upper belt bands and pull tight.
Please note: To ensure that the skis are securely
tied to the A.LIGHT, the flaps must be closed
with the two horizontal UniGrid straps of the
GridLab systems!
9.4 HELMET FASTENER
a
The standard way of fastening your helmet
between the flaps is with the two UniGrid
straps. The helmet’s goggle holder and the two
UniGrid straps guarantee a secure bind. One
of the accessories available is the HelmetGrid,
which provides a secure hold for a helmet if
you are also carrying a snowboard or skis. The
HelmetGrid also lets you attach the helmet as
high as possible on the backpack.
9.5 EXTENSION PACKS
a
You can increase the packing volume of the
A.LIGHT with a line of different-sized extension
packs. To fix these onto the backpack, thread
the aluminium bars on the left- and right-hand
side of the upper side of the backpack and in the
mid-lower section into the fastening loops. Then
shut the Velcro fasteners in the upper middle
section as well as to the left and right under the
flaps.
2
1
1
2
ENGLISH