
51
50
STEP 5
ATTACHING ACTIVATION HANDLE
a
To attach the activation handle, align the pin
with the brass coupler and push the handle
in. With the other hand flip up the plastic flap,
thus administering counter pressure. The brass
coupler will automatically snap back.
STEP 6
VELCRO CLOSURE
a
The Velcro closure secures the activation handle
to avoid unwanted activations.
a
Before you leave a patrolled area, the Velcro
closure must be completely loosened and
attached behind the activation handle to
facilitate an unhindered activation.
a
A tightly fastened Velcro usually prohibits an
activation. In order to completely eliminate
unwanted activations, we recommend that you
remove the activation handle. Particularly in
situations when you could endanger yourself
and other people such as on chairlifts, in
gondolas, in or around a helicopter, the
bus, train, automobile, etc. For the wireless
activation handle please consult the special
instruction manual.
a
Only then is the handle attached properly and
ready to use. Dose the coupler with a drop of
ABS
®
oil at regular intervals so that the handle
can be attached and detached easily. This
prevents accidental activations.
a
If the handle will not attach refer to point 14.1. If
the handle is not attached properly and is stuck
due to the coupler snapping back into place, a
proper activation will be impossible.
a
Attention! Only attach the handle if a full cartridge
has been screwed in. When activating without a
cartridge or with an empty one, the system will be
damaged, see 14.1.
a
If you followed all the steps up to this point your
ABS
®
-System is now operational
ENGLISH