Important InformatIon
4
General product information
The ABL Wallboxes described here represent the current state of technology and com-
ply with all current technical safety requirements, guidelines and standards. The safety
notices in this manual serve to ensure the proper and safe installation as well as subse-
quent operation of the device. Disregard of or actions contrary to the safety information
and instructions contained in this manual may lead to electric shock, fire, severe injury
and/or death.
The ABL Wallbox must be installed by a qualified specialist electrical contractor, con-
nected according to local regulations and norms and subsequently checked and ap-
proved for operation.
Malfunctions affecting the safety of persons, connected vehicles or the device itself
must be repaired by an authorized specialist electrical contractor only.
Should a malfunction occur with your wallbox, please first read the sections regarding
“Error detection and solutions” on page 17. Should the fault or malfunction recur
and still not be able to be resolved, please contact ABL technical support.
Always contact ABL technical support if:
• the housing has been damaged mechanically,
• the housing cover has been removed or can no longer be closed or locked,
• sufficient protection against splashing water and/or foreign objects is obviously no
longer evident,
• there is functional or visible damage to the charging socket or external charging cable,
• or the wallbox does not function properly or has been otherwise damaged.
DANGER!
Should you detect damage to the housing, charging socket or charg-
ing cable, you must immediately discontinue installation or take the al-
ready installed wallbox out of operation via the upstream miniature circuit
breaker(s) (in the following called MCB(s), see also “Glossary & Defini-
tions” on page 28) in your domestic power supply and the RCCB: No
further use of the wallbox is permitted in this case! Please contact ABL
technical support!
Notes regarding installation
Please observe the following instructions for the installation of your ABL Wallbox:
• The device must always be connected to the protective earth conductor of your
electricity supply. The protective earth connection will be made and checked by the
installing contractor. After installation, only qualified specialist electrical contractors
may make changes.
