background image

appendIx

28

Classes of protection & Degrees of protection

Class of protection / 
Degree of protection

Description

The device complies with IEC protection class 1 

IP 54

Degree of protection of the device: Protection against touch, 

dust in harmful quantities and protection from splashing wa-

ter

CE certification and compliance declaration

The ABL Wallbox carries the CE mark. The associated compliance dec-

laration is included with the ABL Wallbox as a separate printed docu-

ment and is also available in electronic form at 

www.abl.de

 

for download.

Glossary & Definitions

In the following, important abbreviations and terms used in this manual are explained.

Abbreviation Description

Meaning

DC

Direct Current

Direct current 

DC-RCM

Direct Current - Residual 

Current Monitor

Monitoring device for detecting DC fault 

currents 

LED

Light Emitting Diode

Light-emitting diode

MCB

Miniature Circuit Breaker Residual current circuit breaker

RCCB

Residual current oper-

ated circuit breaker

Residual current device (RCD)

Trademarks

All trademarks mentioned in this manual including those that may be protected by third 

parties are, without restriction, subject to the regulations of the respectively applicable 

trademark law and the property rights of the respective registered owners. 

Содержание 3W2205



































Отзывы: