Abit AB-CX6, Руководство пользователя

Страница: 41 / 114

Introduction of the BIOS 3-7
User’s Manual
Attention
After setting up the parameters and leaving the BIOS SETUP, and having verified that
the system can be booted, do not press the Reset button or turn off the power supply.
Otherwise the BIOS will not read correctly, the parameters will fail and you must enter
SOFT MENU
™
II again to set up the parameters all over again.
CPU Power Supply:
This option allows you to switch between CPU default and User Define voltages.
➤
➤ ➤
➤
CPU Default: The system will detect the CPU type and select the proper voltage
automatically. When it is enabled, the option “
Core Voltage ” will show
the current voltage setting that is defined by the CPU and this will not be
changeable. We recommend using this CPU default setting and not
changing it unless the current CPU type and voltage setting can not be
detected or is not correct.
➤
➤ ➤
➤
User Define: This option lets the user select the voltage manually. You can change
values in the “
Core Voltage ” option lists by using the arrow up and down
keys.
✏
✏ ✏
✏
Core Voltage:
This voltage depends on which processor you use. When the processor is installed,
the BIOS will automatically detect and provide the range that you can use to make
the adjustment.
Spread Spectrum:
Two options are available: Disable . 0.50%. The default setting is Disabled . For EMC
( E lectro- M agnetic C ompatibility Test) testing you may need to adjust these options for
optimal results, we do not recommend you change the default, except for special reasons.
Some values you select may cause system instability under some situations, please be
careful.