background image

5 Functional Description 

The standard torch neck types 

xFUME

®

 

ABIROB

®

AF500

 360, A500 are available in the geometries

 

straight, 22°,

 

and 45° ben

ds. 

The uniform interface at the connection module makes all torch necks

compatibl

e with one another.

5.2

 

Connection module

The connection module establishes the connection between the welding torch and the cable assembly.

5.3

  Mounting  Bracket

The 

mounting 

bracket is used to attach the 

xFUME

®

 

ABIROB

®

A

F500

 welding torch system to the robot

.

5.4

 

Cable assembly

The air-cooled cable assembly provides the welding torch with all the components required for 
welding, e. g. the welding current, shielding gas and air. 

A fume hose is included but must be connected to an 

extractor for at source fume extraction.

EN 

11

 

Together, the components form a fully-functional entity that provides an arc for welding when 

supplied with the appropriate consumables. The welding wire required for welding is fed through the 

xFUME

®

 ABIROB

®

AF500

 welding torch system all the way to the contact tip. The contact tip 

transmits the welding current to the welding wire, producing an arc between the welding wire and 

the workpiece. The arc and the molten pool are protected by the inert gas (MIG) and the active gas 

(MAG).

5.

1 Torch neck

xFUME

®

ABIROB

®

A

F500

Содержание xFUME ABIROB AF500






















Отзывы: