8 Putting out of operation
8 Putting out of operation
1
Wait until the shielding gas post-flow time has passed.
2
Close the
shut-off valve for the gas supply.
3
Switch off the power source.
9
Maintenance and cleaning
Despite the above, scheduled maintenance and cleaning are prerequisites for a long service life and fault-free
operation.
1
Remove weld spatter.
2
Check that all threaded fittings are tight.
ABICOR
BINZEL
offers factory repair s
ervices.
NOTICE
• When decommissioning the system, ensure that the procedures for switching off the
welding components
are observed.
DANGER
Risk of injury due to unexpected start
The following instructions must be adhered to during all maintenance, servicing, assembly, disassembly and
repair work:
• Switch off the power source.
• Close off the compressed air supply.
• Close off the gas supply.
• Switch off the entire welding system.
• Disconnect all electrical connections.
DANGER
Electric shock
Dangerous voltage due to defective cables.
• Check all live cables and connections for proper installation and damage.
• Replace any damaged, deformed or worn parts.
NOTICE
• The specified maintenance intervals are guidance values and refer to single-shift
operation.
• Only qualified personnel are permitted to perform work on the device or system.
• Check and wear your personal protective equipment.
EN
16
xFUME
®
ABIROB
®
A
F500
