2 Safety
•
Note that if additional hoses or hoses from other manufactures are used,
pressure loss in the fume
extraction torch can result.
•
Note that the applied vacuum depends on the geographic altitude of the
operation site.
•
Observe the warning signals and indicators on the fume extraction system.
Warning
signals and indicators
can imply a saturated filter or a problem
with/damage to the fume torch.
•
Replace the extraction-specific wear parts at regular intervals. The
replacement interval required depends
on the application conditions.
•
Open the
handle
regulator for only a moment and close is quickly after opening it.
The air regular must be
closed
to ensure efficient capture of fumes.
•
Observe the instructions on the adapter label for connecting components.
•
When used with welding fume extraction systems of the
xFUME®
series.
The degree to which welding fumes are captured during torch
integrated
extraction depends on many
factors, such as the position of
the suction nozzle, the welding geometry, and the rate of smoke
emission
during the welding process. Under optimal conditions, over
95% of the welding fumes can be captured in
accordance with ISO
21904-3.
2.
6
Emergency Information
In case of emergency, immediately disconnect the following supplies
:
•
Electrical power
supply
•
Compressed air
supply
•
Gas supply
Further measures can be found in the operating instructions for the power source or the documentation for other
peripheral devices.
EN
5
xFUME
®
ABIROB
®
A
F500
