6.2
Setting up the cable assembly
Fig.
5
Setting up the cable assembly
NOTICE
• Select the correct wire type and appropriate wire guide for your application.
• For information on cutting the wire guide to size and correctly assembling it, please see
the following
section:
9
Maintenance and cleaning on page
EN
-
18
• Spiral liners = for steel and stainless steels
• PA liners = for aluminum, copper, nickel and stainless steels
6
Putting into operation
EN
13
1 Clamp
2 Handle
3 Control Cable
4 Cable Assembly
5 S
u
ction Connector
6 Power Pin
1. Lay out the cable assembly (4) straight and attach to the handle (1 & 2)
2. Attach control cable (3).
3. Insert power pin (6) into the wire feeder.
4. Connect the etraction hose to the suction connector (5).
xFUME
®
ABIROB
®
A
F500
