Abicor Binzel AUT 15 AK, Руководство по эксплуатации

Страница: 34 / 84

EN - 14 BAL.0193.0 • 2018-07-31
6 Commissioning MT/AUT/AUT RAB
6.3 Attaching the cable assembly on the machine side
1 Combine central plug (10) and central socket (9) at the wire feed unit (8) and secure them
with the connecting nut (11) .
6.4 Connecting the coolant
1 Cable assembly
2 Coolant return hose
3 Coolant supply hose
4 Re-circulating cooling unit
(only with liquid-cooled torches)
5 Wire basket spool
6 Shielding gas cylinder
7 Power supply
8 Wire feed unit
9 Central socket
10 Central plug
11 Connection nut
Fig. 5 Mounting the hose assembly on the machine side
1 2 3 4
5
6
7 9 11 8 10
NOTICE
• Check once again whether the wire guide has been fastened correctly.
WARNING
Risk of burns
Welding torches will become overheated if the coolant level is too low.
• Wear protective gloves.
• Check the coolant level at regular intervals.
NOTICE
• Ensure that the coolant supply and return hoses have been correctly installed. Coolant
supply = blue, coolant return = red.
• Do not use deionised or demineralised water as coolant or for leak and flow tests. This
may shorten your welding torch’s service life.