![background image](http://html1.mh-extra.com/html/abicor-binzel/abimig-a155/abimig-a155_operating-instructions-manual_3495130029.webp)
EN - 9
ABIMIG
®
5 Putting into operation
5
Screw together the gas nozzle
and the spatter protector
The spatter protector
moves into the correct position within the gas
nozzle
.
5.4 Attaching the wire guide
5.4.1 Liner
ABIMIG
®
A LW/ABIMIG
®
W
For use of steel wires with undivided wire guide.
1
Stretch out the
BIKOX
®
/cable assembly and unscrew the gas nozzle and
contact tip from the torch neck.
2
Unscrew the nut from the central connector or direct connector and slide the
liner through the
BIKOX
®
/cable assembly up to the retaining nipple.
3
Screw down the nut again, tighten using an ABIMIG
®
wrench and cut off
excess length of the liner flush with the tip adaptor.
4
Screw in contact tip and gas nozzle.
ABIMIG
®
A T LW
For use of steel wires with divided wire guide.
1
Stretch out the
BIKOX
®
/cable assembly and unscrew the gas nozzle and
contact tip from the torch neck.
2
Unscrew the nut from the central connector and slide the liner through the
BIKOX
®
/cable assembly up to the retaining nipple.
NOTICE
• To ensure a secure shielding gas cover, only use gas-tight, plastic-
insulated wire guides.
• Bare liners give rise to a loss of shielding gas.
NOTICE
• New and unused liners must be abridged to the actual length of the
cable assembly.
• If the torch has a fixed torch neck, only through-hole liners are used.
• To install the wire guide with a little preload, excess length is required.
• The sealing plug makes it easier to detach and attach the insulating piece
for ABIMIG
®
W T.
Содержание ABIMIG A155
Страница 21: ...DE 21 ABIMIG 9 Entsorgung...
Страница 79: ...ES 21 ABIMIG 9 Eliminaci n...