![background image](http://html1.mh-extra.com/html/abicor-binzel/abimig-a155/abimig-a155_operating-instructions-manual_3495130033.webp)
EN - 13
ABIMIG
®
5 Putting into operation
4
ABIMIG
®
A T LW:
Slide in the torch neck liner and shorten it at the end free of the retaining
nipple until it flexibly protrudes
2 mm
from the retaining nipple.
ABIMIG
®
W T:
Cut off the torch neck liner
with an excess length of 12 mm from the
current contact area
free of burrs.
5
Deburr the cutting edges.
6
Where applicable, remove the sealing plug and screw the torch neck
into the torch seat on the torch handle.
For welding tasks for which a continuous wire guide is essential, the insulating
bush in the interior of the torch neck seat can be screwed out using a flat head
screwdriver (width approx. 10 mm).
ABICOR BINZEL
offers an optional insulating bush for through-hole wire
guides.
NOTICE
• Ensure that the current contact areas on the torch neck and torch neck
seat are clean.
• For ABIMIG
®
W T, grease the O-rings with silicone-free lubricant
(192.0078). This makes it easier to insert the torch neck and extends the
service life of the O-rings.
Содержание ABIMIG A155
Страница 21: ...DE 21 ABIMIG 9 Entsorgung...
Страница 79: ...ES 21 ABIMIG 9 Eliminaci n...