![background image](http://html1.mh-extra.com/html/abicor-binzel/abimig-a155/abimig-a155_operating-instructions-manual_3495130038.webp)
EN - 18
7 Putting out of operation
ABIMIG
®
7 Putting out of operation
1
Wait until the shielding gas post-flow time has passed.
2
Close the shut-off-valve for the gas supply.
3
Switch off the power source.
4
Switch off the coolant recirculator.
8 Maintenance and cleaning
Scheduled maintenance and cleaning are prerequisites for a long service life
and trouble-free operation.
NOTICE
• When putting the system out of operation, ensure that the procedures for
switching off each of the welding system components are observed.
• As liquid-cooled cable assemblies start to leak when they overheat, the
coolant recirculator should continue running for approx. 5 min. after
welding.
DANGER
Risk of injury due to unexpected start-up
The following instructions must be adhered to throughout all maintenance,
servicing, assembly, disassembly and repair work:
• Switch off the power source.
• Close the gas supply.
• Disconnect the cooling water supply and return hoses.
• Disconnect the mains plug.
DANGER
Electric shock
Dangerous voltage due to defective cables.
• Check all live cables and connections for proper installation and
damage.
• Replace any damaged, deformed or worn parts.
Содержание ABIMIG A155
Страница 21: ...DE 21 ABIMIG 9 Entsorgung...
Страница 79: ...ES 21 ABIMIG 9 Eliminaci n...