DE - 15
ABIMIG
®
5 Inbetriebnahme
5.5 Schlauchpaket maschinenseitig montieren
Abb. 3 Führungsspirale montieren bei Brennern ABIMIG
1
Fügen Sie den Zentralstecker
und die Zentralbuchse am
Drahtvorschubgerät zusammen.
2
Sichern Sie beide mit der Anschlussmutter
3
Montieren Sie bei ABIMIG
®
W / W T die Anschlüsse für Kühlwasservor-
und -rücklauf.
4
Montieren Sie Schutzgas- und Steuerleitungsstecker bei anderen
Maschinenanschlüssen.
HINWEIS
• Achten Sie darauf, dass keine Restkühlmittel in den Drahtförderschlauch
gelangt!
• Halten Sie beim Abschrauben des Brennerhalses
den
stehts nach unten. So vermeiden Sie das Eindringen
von Restkühlmittel in die Gas- und Drahtführung.
• Verschließen Sie den Brennerhals
mit dem Dichtstopfen
Auslaufen von Restkühlmittel zu vermeiden.
Содержание ABIMIG A155
Страница 21: ...DE 21 ABIMIG 9 Entsorgung...
Страница 79: ...ES 21 ABIMIG 9 Eliminaci n...