![background image](http://html1.mh-extra.com/html/abicor-binzel/abimig-a155/abimig-a155_operating-instructions-manual_3495130037.webp)
EN - 17
ABIMIG
®
6 Operation
1
Lay the cable assembly connected to the machine side out straight.
2
Insert the wire into the wire feeder as specified by the manufacturer.
3
Press the ‘zero-current wire feed’ trigger on the wire feeder until the wire
comes out of the contact tip.
5.9 Torch handle control elements
The trigger’s two-cycle mode can be activated when using a standard welding
torch. Further operating modes (e.g. 4-cycle) and torch handle modules
depend on the welding power source and must be ordered separately.
5.9.1 Trigger function
1
Press and hold the trigger on the handle = start welding.
2
Release the trigger = stop welding.
6 Operation
1
Open the shielding gas cylinder.
2
Switch on the power source.
3
Switch on the coolant recirculator for ABIMIG
®
W / ABIMIG
®
W T.
4
Rinse the shielding gas lines.
5
Start the welding process by pressing and holding the torch trigger.
NOTICE
• The ABIMIG
®
welding torch must only be operated by qualified
personnel (in Germany, see TRBS 1203).
• Please also consult the operating instructions for the welding
components, welding power source and welding torch.
Содержание ABIMIG A155
Страница 21: ...DE 21 ABIMIG 9 Entsorgung...
Страница 79: ...ES 21 ABIMIG 9 Eliminaci n...