![background image](http://html1.mh-extra.com/html/abbott/centrimag/centrimag_operation-manual_451004036.webp)
CentriMag
TM
Circulatory Support System Operation Manual (US)
Page 36 of 126
© 2019 Abbott – Document No PL-0047, Rev 11 (December 2019)
descriptions for the active screen. The remaining Battery Time is also provided in Row 2
with both digital and bar indicators.
Row 3
consists of six keypads. The first keypad
(furthest to the left) silences the alarm audio and also serves as the keypad to be
depressed to acknowledge the alarm condition, and the last on the right stops the Pump.
The other four keypads from left to right are: menu options (
MENU
), Pump speed
adjustment (
SET RPM
), and menu item adjustment (
DECREASE) (INCREASE)
.
Figure 17: Operator Control Panel
6.7.2 Controls on the Monitor
The Monitor (
) replicates the information found on the Console Control Panel
). It will display Pump speed, flow and alarm limit data, battery status, and
pressure information. The Monitor can display the information for up to two Consoles
simultaneously. For more information about the Monitor, see
Section 7.24
The Monitor incorporates the same six soft keypads found on the Console control panel.
The first keypad (at the top) silences the alarm audio and also serves as the keypad to be
depressed to acknowledge the alarm condition, and the last (at the bottom) stops the
Pump. The other four keypads from top to bottom are: menu options (
MENU
), Pump
speed adjustment (
SET RPM
), and menu item adjustment (
DECREASE) (INCREASE)
.
Any change made to the System parameters on the Monitor will also be shown on the
Console, and vice versa. It is possible to control the System using the Console front panel
or the Monitor soft keypads when the Monitor is connected to the Console.