manualshive.com logo in svg

ABB UNO-DM-TL-PLUS-US, Руководство по эксплуатации продукта, Страница: 41 / 155

Поделиться
Скачать
ABB UNO-DM-TL-PLUS-US Скачать руководство пользователя страница 41

- 41 -

000634AG

T

ransport and handling

Protect the inverter from shocks, humidity, corrosive environments (e.g. 

salt), vibration, etc during transport and handling.

During handling, do not make any sudden or fast movements that 

can create dangerous swinging.

L

ifting

Equipment used for 

lifting the inverter must be rated for its weight. 

Do not lift more than one inverter at a time.

U

npacking and incoming inspection

Packaging (cardboard, cellophane, staples, adhesive tape, straps, etc.) 

may cause cuts and/or injuries if not handled with care.  It should be 

removed with the proper equipment.

Packaging must be disposed of in accordance with any local regulations.

When the packaging is opened, confirm the inverter and components are 

not damaged and that nothing is missing.  

Immediately report any damage or missing parts to the delivery carrier 

and to ABB Service.

4

Lifting and transport

Содержание UNO-DM-TL-PLUS-US




























































































































































Отзывы:

Нет отзывов