ABB S4Cplus, Инструкция

Страница: 78 / 86

&DOLEUDWLRQ
3.3.3. Defining reference values for calibration of axes 2-6
3HAC 16578-1 Revision: E 76
© Copyri
ght
200
3-2007 ABB.
All rights reserved.
6. Prepare and clean the reference
surfaces to be used.
Clean with isopropanol.
Reference surfaces for bending backward
robots (IRB 1600, 6600, 6650, 6650S, 7600):
xx0500002470
Reference surfaces for parallel rod robots
(IRB 140, 1400, 2400, 260, 4400, 4450S,
660):
xx0500002471
A. Reference surface at the tool.
Preparation is detailed in section
3UHSDUDWLRQRIUHIHUHQFHVXUIDFHDW
WRRORQSDJH
.
B. Reference surface at base.
C. Reference surface of axis 2.
7. Run the service routine CalPendulum
from the FlexPendant and choose
Reference Calibration. If there are no
reference values set for the robot, the
program senses it and requires to
define these.
:DUQLQJ
The robot will automatically
move to the calibration position,
keeping the manually set axis 1 position
and setting axes 2-6 to zero.
The program will guide the operator through
the complete procedure, giving information of
each step to perform. Follow the steps in the
program carefully.
How to run a service routine from the
FlexPendant is detailed in the
2SHUDWLQJ
PDQXDO,5&ZLWK)OH[3HQGDQW
.
$FWLRQ 1RWH
&RQWLQXHG
&RQWLQXHVRQQH[WSDJH