ABB S4Cplus, Инструкция

Страница: 44 / 86

&DOLEUDWLRQ
3.2.4. Updating revolution counters
3HAC 16578-1 Revision: E 42
© Copyri
ght
200
3-2007 ABB.
All rights reserved.
8SGDWLQJUHYROXWLRQFRXQWHUV
*HQHUDO
This section details how to perform a rough calibration of each robot axis, i.e. updating the
revolution counter value for each axis, using the pendant.
6WHS0DQXDOO\UXQQLQJWKHURERWWRWKHFDOLEUDWLRQSRVLWLRQ
This procedure details the first step when updating the revolution counter; manually running
the robot to the calibration position.
:$51,1*
Axis 4 has no mechanical limitation! Cabling inside the manipulator may be damaged if axis
4 is oriented incorrectly when performing calibration of the robot!
&RUUHFWFDOLEUDWLRQSRVLWLRQRID[LVDQG
When running the robot to calibration position, it is extremely important to make sure that
axes 4 and 6 of the below mentioned robots are positioned correctly. The axes can be
calibrated at the wrong turn, resulting in wrong calibrated robot.
Make sure the axes are positioned according to the correct calibration values, not only
according to the calibration marks. The correct values are found on a label, located either on
the lower arm or underneath the flange plate on the base.
At delivery the robot is in the correct position, do NOT rotate axis 4 or 6 at power up before
the revolution counters are updated.
If one of the below mentioned axes are rotated one or more turns from its calibration position
before updating the revolution counter, the correct calibration position will be lost due to
uneven gear ratio. This affects the following robots:
$FWLRQ 1RWH
1. Select axis-by-axis motion mode.
2. Jog the robot to place the
FDOLEUDWLRQPDUNV
within the tolerance zone.
IRB 140, 1400, 2400, 4400, 6600ID/
6650ID: Axes 5 and 6 must be positioned
together!
Shown in section
&DOLEUDWLRQVFDOHVDQG
FRUUHFWD[LVSRVLWLRQRQSDJH
.
3. When all axes are positioned, store the
revolution counter settings.
Detailed in section:
6WHS6WRULQJWKHUHYROXWLRQFRXQWHU
VHWWLQJZLWKWKH738RQSDJH
(RobotWare 4.0).
6WHS6WRULQJWKHUHYROXWLRQFRXQWHU
VHWWLQJZLWKWKH)OH[3HQGDQWRQSDJH
(RobotWare 5.0).
5RERWYDULDQW $[LV $[LV
IRB 140 Yes Yes
IRB 1600 No Yes
IRB 6400 / 200kg Yes No
IRB 6400R / 200kg Yes No
IRB 6600-175/2.55 Yes No
&RQWLQXHVRQQH[WSDJH