ProKiln GAC400
PROBE GAS SAMPLING SYSTEM | OI/GAC400-EN REV. A
3
1
General
About these operating instructions
Scope and purpose
These operating instructions apply to the ABB ProKiln GAC400
Probe gas sampling system for gas sampling at rotary cement
kiln inlet, riser duct and calciner gas exit.
These operating instructions are intended to give all personnel
handling the probe gas sampling system the information
required to perform the following tasks correctly and safely:
• Transport at the company (for first-time delivery,
relocation, storage, putting back into operation)
• Set-up, unpacking and connection
• Start-up
• Operation
• Diagnostics and troubleshooting
• Maintenance
• Shutting down, disassembly, putting back into operation,
storage, and disposal
Target group
These operating instructions are intended for the following
groups:
• Process engineers and design engineers (for preparation
of the installation site)
• Transporter
• Assembly personnel
• Start-up personnel
• Operating personnel
• Maintenance personnel
• Storage personnel
• Disposal personnel
Illustrations in the operating instructions
The illustrations in the operating instructions do not always
depict the actual layout of a probe gas sampling system as
delivered. Therefore, the drawings in the supplied system
documentation are always authoritative.
Failure to observe the operating instructions
Failing to observe the information in this document can lead to a
risk of damage to property, injuries or even death. In order to
ensure safety, all personnel handling the probe gas sampling
system must have read and understood the following sections of
this document before commencing any work:
• The section
Safety
on page 4.
• The sections describing the work to be performed.
Liability
The manufacturer is not liable for damage and disruptions
resulting from a failure to observe these operating instructions
and other applicable documents. The manufacturer of this
equipment can never be liable for any process disruptions or
hazardous or dangerous process conditions as the process
responsibility of operation is entirely placed at the process
operator’s overall evaluation.
Notifying service
Who should you contact for further help?
Please contact your local service representative.
For emergencies, please contact ABB Service:
Telephone: +49-(0)180-5-222 580
Fax: +49-(0)621-381 931 29031
E-mail:
Before you notify service…
Before you notify service because of a malfunction or a status
message, please check whether there actually is an error and
whether the system is actually operating out of specifications.
When you notify service…
When you notify service because of a malfunction or a status
message, have the following information available:
• The serial number of the system, you can find it on the type
plate,
• An exact description of the problem or status as well as the
status message text or number.
This information will enable the service personnel to help you
quickly.
