manualshive.com logo in svg

ABB LEANtouch 6x36/30M-500 Series, Руководство по эксплуатации продукта

Поделиться
Скачать
ABB LEANtouch 6x36/30M-500 Series Скачать руководство пользователя страница 14

14

January 2005

ABB i-bus

®

 EIB

ABB Powernet EIB

LEANtouch (monochrome),
SMARTtouch (monochrome, colour)
Type: 6x36/30M(-500), 6x36/100x(-500), 6x36/100CB

Functional description: Basic
settings

Background illumination

The backlighting of the panel is
switched on automatically as soon as
the display is operated. After the
adjustable period “Background
illumination on for”, the lighting is
switched off again provided that the
panel has not been pressed again.

The panel has three communication
objects in the basic settings. All three
objects are used to control the
backlighting and are 1 bit in size.

The backlighting can be switched via
the object “Background illumination”.
A ON telegram received via the EIB
switches the backlighting on while an
OFF telegram switches it off again.

The object can however also be
linked with an internal address.

Example:
The panel backlighting should always
switch on at 18:00 in the evening and
switch off again at 10:00 in the
morning. To do so, a channel of the
time program function is
parameterised with switching and the
switch object of the channel is linked
with the same internal address as the
background illumination object. The
bus load is reduced on the EIB side
due to the internal link and group
addresses or actions are saved.

The object “Status background
illumination” sends an ON telegram
as soon as the backlighting has been
switched on. If the backlighting
switches off again after the set reset
period, the object sends an OFF
telegram.

The backlighting can be disabled via
the object “Enable status”. If an ON
telegram is received, the backlighting
can be switched. If an OFF telegram
is received, the backlighting remains
disabled.

General

By default, the panel has the
languages German and English. The
display language can be set to a third
language via the setting “Country-
specific”. This third language must be
transferred to the panel via a firmware
update. The additional languages
available can be downloaded from the
Busch-Jaeger homepage
(www.Busch-Jaeger.de).

The panel distinguishes between a
short and long push button action e.g.
when dimming or moving shutters. It
is possible to set the period which the
panel detects as a long push button
action. By default, the period is set at
500 ms.

The panel has an internal
temperature sensor. The measured
value is displayed on the homepage.
The display can also be deactivated
via the setting “Display temperature
indoors”.

The outside temperature is not
displayed by default. The display can
be activated via the display “Display
temperature outdoors”. The outside
temperature is the temperature value
which the panel receives via the
2-byte communication object
“Temperature outside”. It can be
recorded e.g. by a “standard” EIB
temperature sensor and sent via its
2-byte communication object “Actual
value”.

Содержание LEANtouch 6x36/30M-500 Series












































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды