ABB IRB 365, Руководство по эксплуатации продукта, Страница: 218 / 240

8.2 Environmental information
Introduction
ABB robots contain components in different materials. During decommissioning,
all materials should be dismantled, recycled, or reused responsibly, according to
the relevant laws and industrial standards. Robots or parts that can be reused or
upcycled helps to reduce the usage of natural resources.
Symbol
The following symbol indicates that the product must not be disposed of as common
garbage. Handle each product according to local regulations for the respective
content (see table below).
xx1800000058
Materials used in the product
The table specifies some of the materials in the product and their respective use
throughout the product.
Dispose components properly according to local regulations to prevent health or
environmental hazards.
Example application Material
Base structure, upper arms, tilt arm, gear housing,
motors, connection box, cable harness Aluminium
Serial measurement board Batteries, Lithium
Cast iron/nodular iron
Cables, motor wiring, pins, sockets Copper
Wrist casting, upper arm, back cover, tool flange, etc Magnesium
Brakes, motors Neodymium
Gearboxes Oil, grease
Cable, jackets, clamps, O-rings, plugs, clothes,
sealings and gasgets Plastic/rubber
Continues on next page
218 Product manual - IRB 365
3HAC079185-001 Revision: A
© Copyright 2022 ABB. All rights reserved.
8 Decommissioning
8.2 Environmental information