ABB i-bus SA/S 12.10.2.1, Руководство по эксплуатации продукта

Страница: 57 / 171

ABB i-bus

KNX
Commissioning
60 2CDC 505 056 D0208 | SA/S
Destination channels
By selecting the destination channel(s) you define which channel(s) are to assume the parameter settings
of the source channel.
•
For the Exchange function, only one target output can be selected at a time.
•
For the Copy function, various destination channels can be selected simultaneously. To do this, press
the Ctrl key and mark the required channels, e.g. channel B and H, with the mouse pointer.
With this button, you select all available destination channels, e.g. A…H.
Reset the destination channel selection with this button.
Copy
The following options can be selected before copying the parameter settings:
•
Keep group addresses in the destination channel unchanged (if possible)
•
Copy group addresses
•
Delete group addresses in the destination channel
With this button, you copy the settings of the source channel into
the target channel(s).
Exchange
The following options can be selected before exchanging the parameter settings:
•
Exchange without group addresses
•
Exchange with group addresses
•
Delete group addresses
With this button, you exchange the settings of the source channel with
those of the destination channel.
Confirm your selection with this button, and the window closes.
This button, closes the window without accepting the changes.