ABB ClimaECO SBS/Ux.0.1 Series, Руководство по эксплуатации продукта

Страница: 69 / 391

Description of application and parameters
Application "Device settings"
Product manual 2CKA001473B9679 │69
11.1.2.1 Day/Night mode
Options: Deactivated
Activated
■
Deactivated:
– Communication object "LED: day/night mode" is not enabled.
■
Activated:
– Communication object "LED: day/night mode" is enabled.
If a telegram with value "1" (day) is received via the object, the LED lights up brightly. If a
telegram with value "0" (night) is received, the LED lights up dark.
The LED of the button can light up with two different brightness levels. The parameter is used to
specify whether the LED can be switched over between bright and dark. Additional function: If
the "Operating mode" parameter is set on "Status illumination", the "LED: day/night mode"
communication object can also be used for the status display.
Example: The button is assigned with the application "1-button switching" and connected with a
switching actuator that switches a lamp group. The LED of the button is set on "Status
illumination" and a colour is set. If the object "LED: day/night mode" is now connected with the
status response object of the switching actuator via a group address or action and the light is
switched on, the LED lights up bright. If the light is switched off, the LED lights up dark.
Notice
The parameter is available via the following settings:
– Parameter "Operating mode" is set on "Status illumination"
and
– Parameter "Object type for status object" is set on "1 bit"
and
– Parameter "Colour for Off" is set on a colour and not on "Off"
or
– Parameter "Colour for On" is set on a colour and not on "Off".
The parameter is available also via the following settings:
– Parameter "Operating mode" is set on "Status illumination"
and
– Parameter "Object type for status object" is set on "1 byte 0..100%
and
– At least one parameter "Colour for zone x" is set on a colour and not on
"Off".
The parameter is available also via the following settings:
– The "Operating mode" parameter is set on "Function illumination"
and
– Parameter "Colour for function illumination" is set on a colour and not on
"Off".