Description of application and parameters
Application "CO2 sensor"
Product manual 2CKA001473B9679
│169
11.5.38 Settings — Value for output format scene
Options:
0-64
The parameter defines which value should be sent after the threshold value is undershot.
Notice
The parameter is available only when parameter "Control value output format" is
set on "Scene".
11.5.39 Settings - blocking object
Options:
Inactive
Active
The complete function of the CO2 sensor can be switched active or inactive using this
parameter and the corresponding communication object.
11.5.40 Behaviour at removing the blockage
Options:
Do not send any message
Send current value
If the sensor is enabled again after the receipt of an OFF telegram, the following parameters
can be selected:
■
Do not send:
– The sensor only sends its value when it has changed.
■
Send current value:
– The sensor sends its current value also when it has not changed.
Notice
The parameter is available only when parameter "Blocking object" is set on
"Active".
Содержание ClimaECO SBS/Ux.0.1 Series
Страница 382: ...Notes Product manual 2CKA001473B9679 382 13 Notes ...
