42/24-10 EN Rev. 9
Chapter 7: Gas Analyzer Configuration
7-D-5
Parameter Overview
Figure 7-D-4
Parameter Overview
Explanations
The display parameters have the following functions:
Name
The
Name
of the display element is set by the system and cannot be changed.
Measuring point
The description entered for the
Measuring point
appears over the display
element during measurement operation. The description is set by the system; it
can be changed for the user-configured display elements. The maximum length is
20 characters.
Source
The
Source
of the display elements is always a function block. The source
cannot be changed for the display elements of the default assignment, i.e. the
measured quantities, and for the key entries.
Page
The parameter
Page
indicates the page on which the display element is shown.
Each display element can be moved to any system or user page.
Position
The
Position
of a display element on a system page is determined by the
system. It can be changed by being exchanged with another display element.
The user can freely configure the position on a user page.
Style
The
Style
of display depends on the source type. The following display styles
exist: bar display, point display, value entry and key entry.
Examples of the different display styles are shown as soon as this parameter is
selected.
The value entry and key entry display styles are explained in greater detail on
pages 7-D-10 and 7-D-12.
Range Low,
Range High
The
Range Low
and
Range High
parameters determine the measurement
range of the bar display and the point display. They cannot be changed for the
display elements of the default assignment, i.e., the measured quantities.
Places
The
Places
parameter determines the number of decimal places for the digital
display of the measured values for the bar display and point display. It cannot be
changed for the display elements of the default assignment, i.e., the measured
quantities.
