42/24-10 EN Rev. 9
Chapter 4: Electrical Connection
4-5
4-Way Analog Output Module: Electrical Connections
1
2
3
4
5
6
7
8
Figure 4-5
4-Way Analog Output
Module
Connection Diagram
1
2
3
4
5
6
7
8
AO3
AO1
+
+
-
-
AO4
AO2
+
+
-
-
0/4 to 20 mA, max. 750
Ω
0/4 to 20 mA, max. 750
Ω
0/4 to 20 mA, max. 750
Ω
0/4 to 20 mA, max. 750
Ω
AO1-AO4
Analog Outputs:
0/4-20 mA (configurable, factory-set to 4-20 mA), common negative
pole, galvanically separated from ground, freely connectable to
ground, max. gain vs. local protective ground potential 50 V,
max. working resistance 750
Ω
. Resolution 16 bit. The output signal
cannot be lower than 0 mA.
Design: 8-pin terminal strip for stranded or solid cable with a maximum section of
1 mm
2
(17 AWG). Observe the information on needed materials (see page 4-13).
“Standard Terminal Connections” section (see page 4-9) contains information on
standard terminal assignment. Please observe also the specifications in the
analyzer data sheet.
