ABB ACS580-07-0495A-4, Руководство по оборудованию

Страница: 100 / 174

96 Start-up
2 – Additional settings: Start, stop and reference values
If you do not wish to use a macro, define the settings for
start, stop and reference:
Select
Start, stop, reference and press ( Select )
(or ).
Adjust the parameters according to your needs.
Select a parameter and, depending on the parameter
type, press
( Edit ) or press ( Select ) (or ).
When you change the settings, you also change the use
of the I/O signals in the drive. Make sure the actual I/O
wiring and the use of I/O in the control program match
each other. You can check the current I/O use in the
I/O
menu under the Main menu.
After making the adjustments, go back to the Primary
settings menu by pressing ( Back ).
2 – Additional settings:
Ramps
(acceleration and deceleration times for the motor)
Select Ramps and press ( Select ) (or ).
Adjust the parameters according to your needs.
Select a parameter and press
( Edit ).
After making the adjustments, go back to the Primary
settings menu by pressing ( Back ).
2 – Additional settings:
Limits
Select Limits and press ( Select ) (or ).
Adjust the parameters according to your needs.
Select a parameter and press
( Edit ).
After making the adjustments, go back to the Primary
settings menu by pressing ( Back ).