ABB ACS580-01 drives, Руководство по оборудованию

Страница: 140 / 226

140 Technical data

Switching frequency derating
The output current is calculated by multiplying the current given in the rating table by
the derating factor given in the table below.
Note: If you change the minimum switching frequency with parameter 97.02
Minimum switching frequency, derate according to the table below. Changing
parameter 97.01 Switching frequency reference does not require derating.

Altitude derating
In altitudes 1000…4000 m (3300…13120 ft) above sea level, the derating is 1% for
every 100 m (330 ft).
The output current is calculated by multiplying the current given in the rating table by
the derating factor k, which for x meters (1000 m <= x <= 4000 m) is:
Check the network compatibility restrictions above 2000 m (6562 ft), see Installation
site altitude on page 159 . Check also PELV limitation on relay output terminals above
2000 m (6562 ft), see sections Isolation areas, R0…R4 (CCU-11): on page 155 and
Isolation areas, R5…R9 (CCU-12): on page 156 .
Frame
size
Type
ACS580
-01
Derating factor (k) for the minimum switching frequencies
1 kHz 2 kHz 4kHz 8 kHz 12 kHz
R0 02A6-4…05A6-4 1 1 1 0.67 0.5
R1 07A2-4…12A6-4 1 1 1 0.67 0.5
R2 017A-4…025A-4 1 1 1 0.65 0.48
R3 032A-4…045A-4 1 1 1 0.65 0.48
R4 062A-4 1 1 1 0.82 0.64
R4 073A-4 1 1 1 0.73 0.55
R5 061A-4…087A-4 1 1 0.92 0.7 0.57
R6 105A-4…145A-4 1 0.97 0.83 0.66 0.5
R7 169A-4…206A-4 1 0.98 0.88 0.7 0.5
R8 246A-4…293A-4 1 0.96 0.81 0.6 N/A
R9 363A-4…430A-4 1 0.95 0.78 0.56 N/A
k = 1 -
1
10 000 m
. (x - 1000) m