ABB ACS580-01 drives, Руководство по оборудованию

Страница: 162 / 226

162 Technical data
CE marking
A CE mark is attached to the drive to verify that the drive follows the provisions of the
European Low Voltage, EMC, RoHS and WEEE Directives.The CE marking also
verifies that the drive, in regard to its safety functions (such as Safe torque off),
conforms with the Machinery Directive as a safety component.

Compliance with the European Low Voltage Directive
The compliance with the European Low Voltage Directive has been verified according
to standard EN 61800-5-1:2007. Declaration (3AXD10000302784) is available on the
Internet. See section
Document library on the Internet on the inside of the back cover.

Compliance with the European EMC Directive
The EMC Directive defines the requirements for immunity and emissions of electrical
equipment used within the European Union. The EMC product standard (EN 61800-
3:2004 + A1:2012) covers requirements stated for drives. See section
Compliance
with the EN 61800-3:2004 + A1:2012 below. The declaration (3AXD10000302784) is
available on the Internet. See section Document library on the Internet on the inside
of the back cover.

Compliance with the European ROHS II Directive 2011/65/EU
The RoHS II Directive defines the restriction of the use of certain hazardous
substances in electrical and electronic equipment. The declaration
(3AXD10000302784) is available on the Internet. See section
Document library on
the Internet on the inside of the back cover.

Compliance with the European Machinery Directive
2006/42/EC 2nd Edition – June 2010
The drive is a machinery component that can be integrated into a wide range of
machinery categories as specified in European Commission’s
Guide to application of
the Machinery Directive 2006/42/EC 2nd Edition – June 2010 . The declaration
(3AXD10000302783) is available on the Internet. See section Document library on
the Internet on the inside of the back cover.
Validating the operation of the Safe torque off function
See chapter Safe torque off function on page 197 .
NEMA 250:2008 Enclosures for Electrical Equipment (1000 Volts
Maximum)