ABB ACS580-01 drives, Руководство по оборудованию

Страница: 32 / 226

32 Operation principle and hardware description

External control connection terminals, frames R0…R4
The layout of the external control connection terminals of the R0 frame is shown
below. Layout of the external control connection terminals is identical in frames
R0…R4 but the location of the control board with the terminals is different in frames
R3…R4.
Description
X1 Analog inputs and outputs
X2 Aux. voltage output
X3 Programmable digital inputs
X4 Safe torque off connection
X5 Connection to embedded EIA-485
fieldbus adapter module (installed in
option slot 3)
X6 Relay output 3
X7 Relay output 2
X8 Relay output 1
X10 Auxiliary fan connection
X13 Option slot 1 (fieldbus adapter
modules)
X14 Option slot 2 (I/O extension
modules)
X15 Option slot 3 (embedded EIA-485
fieldbus adapter module)
S1, S2 Voltage/Current selection switches
for analog input 1 (S1) and analog
input 2 (S2), see section
Switches
on page 100 .
S3 Voltage/Current selection switch for
analog output 1, see section
Switches on page 100 .
S4, S5 Termination switch (S4), bias
resistor switch (S5), see section
Switches on page 100
1 Panel port (control panel
connection)
2 Cold configuration connection. This
connector is used with the CCA-01
configuration adapter.
3 Power OK and Fault LEDs. See
section
LEDs on page 130 .
R0…R4
X13
X14
1
2
X15
3
S4
S1
X1
X2
X3
X4
X5
X6
X7
X8
X10
S2
S3
S5