ABB ACS580-01 drives, Руководство по оборудованию

Страница: 153 / 226

Technical data 153
Digital inputs DI1…DI6
(Term. 13…18) Input type: NPN/PNP
Terminal size:
Frames R0…R4: 0.14…1.5 mm
2
Frames R5…R9: 0.14…2.5 mm
2
DI1…DI5 (Term.13…17)
12/24 V DC logic levels: “0” < 4 V, “1” > 8 V
R
in
: 3 kohm
Hardware filtering: 0.04 ms, digital filtering: 2 ms sampling
DI6 (Term.18)
Can be used as a digital or frequency input.
12/24 V DC logic levels: “0” < 3 V, “1” > 8 V
R
in
: 3 kohm
Max. frequency 16 kHz
Symmetrical signal (duty cycle D = 0.50)
Relay outputs RO1…RO3
(Term. 19…27) 250 V AC / 30 V DC, 2 A
Terminal size:
Frames R0…R4: 0.14…1.5 mm
2
Frames R5…R9: 0.14…2.5 mm
2
See sections Isolation areas, R0…R4 (CCU-11): on page
155 and Isolation areas, R5…R9 (CCU-12): on page 156 .
Analog inputs AI1 and AI2
(Term. 2 and 5) Current/voltage input mode selected with a dip switch, see
page
100 .
Current input: 0(4)…20 mA, R
in
: 100 ohm
Voltage input: 0(2)…10 V, R
in
: > 200 koh
Terminal size:
Frames R0…R4: 0.14…1.5 mm
2
Frames R5…R9: 0.14…2.5 mm
2
Inaccuracy: typical ±1%, max. ±1.5% of full scale
Analog outputs AO1 and AO2
(Term. 7 and 8) Current/voltage output mode for AO1 selected with a dip
switch, see page
100 .
Current output: 0…20 mA, R
load
: < 500 ohm
Voltage output: 0…10 V, R
load
: > 100 kohm (AO1 only)
Terminal size:
Frames R0…R4: 0.14…1.5 mm
2
Frames R5…R9: 0.14…2.5 mm
2
Inaccuracy: ±1% of full scale (in voltage and current
modes)
Reference voltage output for
analog 10V DC
(Term. 4) Max. 20 mA output
Inaccuracy: ±1%
Safe torque off (STO) inputs IN1
and IN2
(Term. 37 and 38) 24 V DC logic levels: “0” < 5 V, “1” > 13 V
R
in
: 2.47 kohm
Terminal size:
Frames R0…R4: 0.14…1.5 mm
2
Frames R5…R9: 0.14…2.5 mm
2