ABB ACH580-31, Руководство по оборудованию

Страница: 281 / 284

< 1 mA PTC terminal current
< 50 ohm ±10% Short-circuit detec-
tion
The PTC input is reinforced/double insulated. If the motor part of the PTC sensor and wiring
are reinforced/double insulated, voltages on the PTC wiring are within SELV limits.
If the motor PTC circuit is not reinforced/double insulated (ie, it is basic insulated), it is
mandatory to use reinforced/double insulated wiring between the motor PTC and CMOD-
02 PTC terminal.
Relay output (62…63)
1.5 mm2 Maximum wire size
250 V AC / 30 V DC / 5 A Maximum contact
rating
1000 VA Maximum breaking
capacity
External power supply (40…41)
1.5 mm2 Maximum wire size
24 V AC / V DC ±10% (GND, user potential) Input voltage
25 W, 1.04 A at 24 V DC Maximum power con-
sumption
Isolation areas
CMOD-02
PTC
in
RO PTC 24 V
in
1
Plugged to drive SLOT2 1
Reinforced insulation (IEC 61800-5-1:2007)
Functional insulation (IEC 61800-5-1:2007)
Dimension drawing
The dimensions are in millimeters and [inches].
CMOD-02 multifunction extension module (external 24 V AC/DC and isolated PTC
interface) 281