AAVIX AGT1424S, Руководство пользователя

Страница: 22 / 33

22
performance and safety of the product
cannot be guaranteed.
3. Attach and secure the belt case with
the bolts.
Shear pin
A clog or jam in the auger may cause one
or both of the shear pins to break. This is
a safety mechanism to protect other
parts of the product against overload
and damage.
Replace a broken shear pin with one of
the same type if required.
1. Unscrew the nut from the broken
shear pin and remove them from the
auger shaft.
2. Place a new shear pin through the
hole in the auger shaft and tighten it
with the nut.
Wheels
1. Check the wheels for pressure before
every operation. Pump up the wheels
with a proper tire pump if necessary.
Observe the max. allowed pressure
marked on the wheels.
2. If the wheels are damaged or worn
replace them with a new one of the
same type.
Engine oil
NOTE: Check the oil level and
quality before each use and
after every five hours of
operation to be sure correct oil
level is maintained.
The oil should be clear and thick. If the
oil is sticky or contains dirt particles the
oil must be changed.
1. Place a suitable container under oil
drain screw to collect drained oil.
2. Unscrew the oil drain screw and let
the oil run into the container.
3. Screw the oil drain screw back in.
4. Wipe spilled oil up.
5. Refill the oil tank as described
inspection “Engine oil and fuel– Engine
oil”.
Fuel
NOTE: Fuel deteriorates over
time. Engine starting may be
difficult if you use fuel kept for more
than 30 days. Do not reuse any fuel that
has been removed. Always empty the
fuel tank when storing over 30 days.
1. Switch off the fuel lever. Empty the
fuel in tank and carburettor when
storing the product over 30 days to
avoid deterioration of the fuel.
2. Place a suitable container under fuel
drain screw of the carburettor to collect
drained fuel
3. Unscrew the fuel drain screw, move
the fuel lever to its open position and let
the fuel run into the container.