21
Auger shaft
Remove the shear pins and nuts on the
auger shaft. Spray lubricant inside the
shaft and lubricate the auger bearings at
least once a season.
1. Unscrew the lubricating grease drain
bolt underneath the gear box.
2. Add freezing lubricating grease
through opening of the grease adding
bolt with an oil gun (not provided).
3. When the grease comes out of the
place of the drain hole underneath the
gear box, clean and dry the place and
tighten the oil drain bolt.
5. Clean and dry the place of grease
adding bolt.
5. Do this operation at least once a year.
Skid shoe
Replace worn skid shoes always in a pair.
1. Loosen the nuts and remove them
together with the bolts, washers and
skid shoes on both upper sides of the
guard.
2. Secure new skid shoes to the guard.
Ensure the scraper plate is correctly
aligned to the hole in the guard.
3. Secure the skid shoes with the bolts,
washers and nuts in reverse order.
Scraper
1. The scraper is located at the base of
the product beneath the guard.
2. Detach and remove the worn scraper
from the product by removing the bolts,
washers and nuts that hold it in place.
3. Install the new scraper and fasten it
securely to the guard with the bolts,
washers and nuts in reverse order.
Belt
1. Loosen the bolts on both sides of the
belt case and remove them together
with the case.
2. Check the belts for any damage and
wear. Have them replaced if they are
damaged or worn. Otherwise the
Содержание AGT1424S
Страница 1: ......
Страница 10: ...10 KNOW YOUR SNOW BLOWER Fig 1 Fig 2 Fig 3...
Страница 26: ...26 EXPLODED VIEW...
Страница 27: ...27...