AAVIX AGT1424S, Руководство пользователя

Страница: 24 / 33

24
adjustment bracket. Remove the return
spring. Take off the clip and washer by a
pliers. Then, remove “L” hook from the
cable adjustment bracket. See below
photo A,B.
A
B
2. Lower hand holds the adjustment
bracket and lift it up. Upper hand moves
the “L” hook to the next adjustment
hole.
3. Replace the clip and washer. Put the
cable boot over the cable adjustment
bracket.
4. To check the adjustment, start the
snow thrower.
4.1 Make sure the auger does not
rotate when the auger drive lever is
released.
4.2 Make sure the machine does not
move forward or backward
automatically.
5.
Release control levers. The wire gets
slightly slacked. When the lever is
released, the wire must be neither
slacked nor tensed. If you find some play,
it is necessary to adjust and tense the
wire. When the wire is correctly tensed
the lever must touch the handle when
pushed. In different case is necessary to
adjust the wire.
Carburettor
The carburettor is pre-adjusted by the
manufacturer. Should it be necessary to
make any changes please contact an
authorized service centre or similar
qualified specialist. Do not attempt to
make adjustments by yourself.
Storage
1. Clean the product as described above.
2. Store the product and its accessories
in a dry, frost-free place.
3. Always store the product in a place
that is inaccessible to children. The ideal
storage temperature is between 10 and
30°C.
4. We recommend using the original
package for storage or covering the
product with a suitable cloth or
enclosure to protect it against dust.
5. If you are not going to use the product
for an extended period of time (more
than 30 days) and before storing it for
the winter, empty the fuel in tank and
carburettor and oil tank.
Transportation
1. Switch the product off and secure do