AAVIX AGT1424S, Руководство пользователя

Страница: 20 / 33

20
Maintenance Table
Part To do
Before/after
each use 5
hours 25
hours 50 hours /
half year 100 hours /
once a year
Engine Oil Check
X
Engine Oil Change
X
Spark plug Check
X
Spark plug Clean
X
Spark plug Replace whenever necessary
Valve play Adjust whenever necessary
Exhaust
area
Clean
X
Removing blockages
WARNING! Wear protective
gloves when removing
blockages! Use proper tools
to remove debris, e. g. a
wooden stick! Never use
your bare hands!
Warning! Rotating working
tool, keep hands away! Do
not insert your hands into
the discharge chute.
1. Check the discharge chute for
blockages and use the clean-out tool to
remove any.
2. Check the auger and remove possible
clogging with the shovel, brush or blunt
tool. Check to make sure the auger is in
an undamaged condition. Contact an
authorized service centre if parts are
damaged and a replacement is
necessary.
Auger
WARNING! Wear protective
gloves when working on the
auger to avoid injuries!
WARNING! Wait until all
moving parts have come to a
complete stop before
touching them. Auger
continues to rotate after the
product is switched off.
1. Remove snow from the auger after
use using a proper brush or tool.
2. Check for any damage and wear. Have
the auger replaced by a qualified
specialist if it is bent, damaged or worn.
Otherwise the performance and safety
of the product cannot be guaranteed.