Form No. 3373-842 Rev A
722 E Power Throw
®
Snowthrower
Model No. 38818—Serial No. 313000001 and Up
Operator's Manual
Introduction
This machine is intended to be used by residential
homeowners or professional, hired operators. It is
designed primarily for removing snow from paved
surfaces, such as driveways and sidewalks, and other
surfaces for traffic on residential or commercial
properties. It is not designed for removing materials
other than snow, nor is it designed for clearing off gravel
surfaces.
Read this information carefully to learn how to operate and
maintain your machine properly and to avoid injury and
machine damage. You are responsible for operating the
machine properly and safely.
You may contact Toro directly at www.Toro.com for machine
and accessory information, help finding a dealer, or to register
your machine.
Whenever you need service, genuine Toro parts, or additional
information, contact an Authorized Service Dealer or Toro
Customer Service and have the model and serial numbers of
your machine ready. Figure 1 identifies the location of the
model and serial numbers on the machine. Write the numbers
in the space provided.
Figure 1
1.
Model and serial number location
Model No.
Serial No.
This manual identifies potential hazards and has safety
messages identified by the safety alert symbol (Figure 2),
which signals a hazard that may cause serious injury or death
if you do not follow the recommended precautions.
Figure 2
1.
Safety alert symbol
This manual uses 2 words to highlight information.
Important
calls attention to special mechanical information
and
Note
emphasizes general information worthy of special
attention.
Replacement Engine Owner's Manuals may be ordered
through the engine manufacturer.
Contents
Introduction .................................................................. 1
Training ................................................................. 3
Preparation............................................................. 3
Operation............................................................... 3
Clearing a Clogged Discharge Chute .......................... 4
Maintenance and Storage.......................................... 4
Toro Snowthrower Safety ......................................... 4
Sound Pressure ....................................................... 5
Sound Power .......................................................... 5
Vibration................................................................ 5
Safety and Instructional Decals ................................. 6
Setup ............................................................................ 8
1 Installing the Handle ............................................. 9
2 Installing the Speed Selector Rod............................10
3 Installing the Traction Rod ....................................10
4 Installing the Auger/ Impeller Drive Control
Linkage .............................................................11
5 Installing the Chute Control Rod ............................12
6 Filling the Engine with Oil.....................................13
7 Checking the Tire Pressure ....................................14
8 Checking the Skids and Scraper ..............................14
Product Overview .........................................................14
Controls ...............................................................15
Operation ....................................................................15
Freewheeling or Using the Self-propel Drive...............15
Filling the Fuel Tank ...............................................15
Starting the Engine .................................................16
© 2012—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
Register at www.Toro.com.
Original Instructions (EN)
Printed in the USA
All Rights Reserved
*3373-842* A
