AAVIX A12101, Руководство пользователя

Страница: 14 / 30

14
125 V~ 3-Prong Plug and Outlet (for
up to 125 V~ and up to 15 A)
2.
Make sure the outlet being used
has the same configuration as the
grounded plug. DO NOT USE AN
ADAPTER
.
3.
Inspect the plug and cord before
each use. Do not use if there are
signs of damage.
4.
Check with a qualified electrician,
if you are in doubt as to whether
the outlet is properly grounded. Do
not modify the power cord plug
provided with the compressor.
5.
Never remove the grounding
prong from the plug. Do not use the
compressor if the power cord or plug
is damaged. If damaged, have it
repaired by a service facility before
use. If the plug will not fit the outlet,
have a proper outlet installed by a
qualified electrician .
6.
In the event of a malfunction or
breakdown, grounding provides a
path of least resistance for electric
current to reduce the risk of electric
shock. This compressor is equipped
with an electric cord having an
equipment-grounding conductor and
a grounding plug. The plug must be
plugged into a matching outlet that
is properly installed and grounded in
accordance with all local codes and
ordinances.Do not modify the plug
provided -if it will not fit the outlet,
have the proper outlet installed by a
qualified electrician.
7.
Improper connection of the
equipment-grounding conductor can
result in a risk of electric shock.
8.
The conductor with insulation
having an outer surface that is green
with or without yellow stripes is the
equipment-grounding conductor.If
repair or replacement of the electric
cord or plug is necessary, do not
connect the equipment- grounding
conductor to a live terminal.
9.
Repair or replace damaged or
worn cord immediately.
Repairs to the cord set or plug MUST
be made by a qualified electrician.
Break-in the Compressor
Break in the new Air Compressor as
follows:
a) Turn the Power Switch OFF and
unplug the unit. Insert a male coupler
(not provided)into the female Quick
Coupler and fully open all regulators
and valves.
b) Plug in the Power Cord.
c)
Turn the Power Switch
ON
.
d) Let the unit run for 30 minutes.
Air will expel freely through the
Coupler.
e) Turn the Power Switch OFF .
Unplug the Power Cord and remove
the male coupler.
Air Connection Setup
1. Connect a regulator valve, an inline
shut off valve and a 1/4" NPT air hose
to the Quick Coupler (all not
provided ). The air hose must be long
enough to reach the work area with
enough extra length to allow free