Venture 3-Line Telephone with Answering Device User Guide 23
Making & receiving calls
Setting up Room
monitor
The Room monitor feature is used to
remotely listen to sounds in a room,
such as an unattended lobby or a
baby’s room. The Room monitor
feature only works between two
phones at a time. When functioning,
each phone’s display shows the
message:
Room monitor ON
.
If you receive a call when Room
monitor is active, you must press the
flashing line key to answer the call
and press
“
to view the incoming
callers information. Answering a
call turns Room monitor off on
both phones. If your TAD answers
the call, Room monitor remains
activated.
You must first program a memory
key with the room monitor option
(see Option “08 Memory keys prog”
on page 26) for every Venture set.
Saving Room monitor to a
memory key
1.
Press
O
.
2.
Press
’
until the display shows:
08 Memory keys prog
.
3.
Press
*
. The display shows:
Don’t disturb
.
4.
Press
’
until the display shows:
Room monitor
.
5.
Press
*
. The display shows:
Press memory key
.
6.
Press the memory key you want
to use for the Room monitor
feature. The display shows:
Saved: Memory key
Room monitor
.
7.
Note on the memory key label
which key you have used for
Room monitor.
8.
Repeat steps 1 through 7 on
every Venture set from which
you may wish to monitor.
Setting the Room monitor
option
On the set you wish to listen to, you
must set Option “07 Room monitor”
on page 26 to on. If this option is not
set to on, the Room monitor option is
not available.
1.
Press
O
.
2.
Press
’
until the display shows:
07 Room monitor OFF
.
3.
Press
*
. The display shows:
Room monitor ON
.
To activate Room monitor
1.
Go to the phone from which you
wish to listen (monitoring
phone).
2.
Press
’
until the display shows
the ID of the phone you want to
monitor.
P0814619 01 E UG.VTAD Page 23 Wednesday, April 15, 1998 4:30 PM