12 Venture 3-Line Telephone with Answering Device User Guide
Getting star
ted
☞
For additional configurations
see pages 71 through 73.
Attaching the stand
With the line cord routed through the
hole on the stand:
1.
Align the tabs on the edge of the
stand with the holes on the back
of the phone.
☞
You can adjust the phone to sit
at a higher or lower angle by
choosing between the two sets
of holes on the phone.
2.
Lower the tabs into the holes that
you have chosen.
3.
Push the stand against the phone
until the tabs click into the
locking holes.
4.
Press the cord into the channels
on the bottom of the stand.
Removing the stand
1.
Firmly grasp the stand and the
phone.
2.
Pull hard until the parts separate.
☞
You will hear a loud cracking
sound as the stand separates
from the base.
Installing a phone on a
wall
To install a Venture phone on the
wall, the wall jack should have a wall
mount plate (which can be purchased
from your telephone company or
from an electronics store) and be
configured with all lines on one jack
(see the illustration on page 9).
1.
Plug one end of the handset cord
into the handset port on the back
of your phone.
2.
Press the cord into the channel
provided.
3.
Press the CAM into the cavity in
the back of your phone.
4.
Plug one end of the black
short
8-wire
cord to the phone port of
your CAM.
P0814619 01 E UG.VTAD Page 12 Wednesday, April 15, 1998 4:30 PM
