Ascotel® IntelliGate® 150/300 as of I7.9
164
Operation and Maintenance
sy
d-
021
0/1.
7
– I7.
9 – 1
2.
2009
7.
"Select
EUL via LAN
" and use the "
Settings
" button to enter the IP address.
8.
Click the "
Upload
" button.
→
The Emergency Upload is started.
6. 2. 2
Software of corded system terminals
The software for the system terminals is contained in the PBX's system software
and is therefore always updated along with the PBX's system software.
The Office 10, Office 25 and Aastra 5360 system terminals do not have their own
memory. The Office 35, Office 45, Aastra 5370 and Aastra 5380 system terminals
and all IP system terminals (hardphones) have a flash memory.
System terminals with flash memory
The flash memory contains the boot software and the application software. AD2
terminals also have an area with the interface software.
The actual software for the radio unit is contained in the PBX's system software. (Ex-
ception: Office 35). When you start up the terminal, the software versions of the ter-
minals are compared with that of the PBX. If the versions differ, the software is
downloaded from the PBX to the terminal. When updating the PBX software this
can take several minutes for each AD2 terminal.
Aastra M530 and Aastra M535 also have a flash chip containing software. The up-
date mechanism is the same as the one described above. However a local power
supply is always required (Power over Ethernet is also possible with IP terminals).
