Ascotel® IntelliGate® 150/300 as of I7.9
158
Operation and Maintenance
sy
d-
021
0/1.
7
– I7.
9 – 1
2.
2009
Configuration data is available for system terminals only. It is stored in a parallel
Flash memory and saved during the AIMS backup.
Configuration data can be modified either using AIMS or directly from the system
terminal.
6. 1. 1. 5
System-specific data
The system-specific data (system ID, system type, sales channel, licence code, gen-
eration, DECT identification numbers, IP address of the Ethernet interface on the
mainboard) is stored on the EIM card (chip card). This data is not deleted by a first
start of the PBX, and remains available. It can be ported to a different PBX by replac-
ing the EIM card.
6. 1. 2
Updating configuration data
System configuration data can only be modified using AIMS (see also
).
Terminal configuration data can be modified using both AIMS and the system ter-
minal (see also
"Terminal configuration data", page 157
6. 1. 2. 1
Maintaining configuration data with AIMS
Maintaining configuration data with AIMS (Upload / Download, Backup / Restore)
is described in detail in AIMS help.
6. 1. 2. 2
Deleting terminal configuration data
To delete the system configuration data from a system terminal, delete the termi-
nal's user number from the numbering plan in the system configuration (Configu-
ration Manager) using the Delete key. All the data is then reset to its initialization
values.
The terminal configuration data of a single system terminal can be reset to the first-
start values in the Configuration Manager under 3_2_2 with the "
Reset terminal
data
" button.
