Ascotel® IntelliGate® 150/300 as of I7.9
32
Expansion Stages and System Limits
sy
d-
021
0/1.
7
– I7.
9 – 1
2.
2009
3. 3. 1. 3
Option card
The ODAB options card contains relays, control inputs and an analogue terminal
circuit for connecting a door intercom (TFE). The I/Os of the options card are partly
configurable and can be used for the following purposes:
•
The relays are used to switch any external devices or equipment. Any authorized
user can operate the relays.
•
Floating contacts are connected to the control inputs. This means that the con-
nected control inputs can control switch group positions.
•
Connection of a door intercom (TFE):
– Bell input, which can be configured to any internal destination depending on
the position of a switch group.
– Door intercom system, which can be dialled using a separate number and op-
erated via a phone by any authorized user.
– Door opener, which can be activated via a phone by any authorized user.
– Input for feeding the voice path (switching the door intercom on/off ).
Tab. 8
Options card
Note
If the options card is used to connect a door intercom, it must be fitted to
slot IC2 (A150) or slot IC4 (A300). This means that only one options card
can be used for this purpose on each basic system. If using relays and
control inputs only, use the slots IC1 slots (A150) or IC1, 2 and 3 (A300).
Ascotel® IntelliGate® Net:
A total of 22 ODAB options cards can be used in an AIN with A300 as Mas-
ter. However the maximum number of cards per PBX has to be taken into
account. An authorized user has the possibility of operating all the door
openers, door intercom system and relays in an AIN. One of the switch
groups 1…20 can be switched over using the switch group interface on
the options cards.
Type
Relays or con-
trol inputs
Analogue terminal cir-
cuit for connecting a
door intercom
Max. number
of A150 cards
Max. number
of A300 cards
Remarks
ODAB
4
1)
1)
1 relay output or 1 control input is available in the configuration as a door intercom. If the option card is used
for other purposes, 2 relay outputs and 2 control inputs can be used.
1
1
2
Used also in
A200
