Aastra 9480i CT Series Скачать руководство пользователя

Страница: 239 / 294

Model 9480i CT IP Phone User Guide

229

Additional Features

Enable/Disable Call Waiting

The call waiting feature notifies the user on an active call, of a new incoming call. You can disable

the call waiting feature, so that the new incoming call is automatically rejected by the phone with a

busy message.

If you disable call waiting on the phone, and the user is on a call, any further incoming calls

receive busy unless “

Call Forward Busy

” or “

Call Forward No Answer and Busy

” is

configured on the phone (for information on

“Call Forward Account-Based Configuration”

, see

page 176

.) It then forwards the call according

to the rule configured. The phone can only:

•

transfer the currently active call

•

accept transferred calls if there is no active calls.

If call waiting is disabled:

•

intercom calls are treated as regular incoming calls and are rejected.

•

pre-dialing with live dial pad disabled still accepts incoming calls.

•

the “Incoming Call Interrupts Dialing” parameter is ignored because the incoming call is
automatically rejected (for information on

“Incoming Call Interrupts Dialing”

see

page 235

•

the Missed Calls List does not get updated with details of calls.

•

the Blind Transfer feature on the phone may not work if two calls are made to the phone at one
time.

You can disable call waiting using the configuration files or the Aastra Web UI.

Enabling/Disabling Call Waiting

Use the following procedure to enable or disable Call Waiting on the IP phone.

Aastra Web UI

Note:

"Call Waiting" is enabled by default.

Содержание 9480i CT Series







































































































































































































































































































Результаты поиска

Содержание 9480i CT Series

Отзывы:

Похожие инструкции для 9480i CT Series

Бренды по названию

Популярные бренды

Aastra 9480i CT Series, Руководство пользователя

Результаты поиска

Содержание 9480i CT Series

Отзывы:

Похожие инструкции для 9480i CT Series

Бренды по названию

Популярные бренды