AAQ AutoLift AL-6000A, Руководство по установке и инструкции по эксплуатации

Страница: 8 / 36

!
ATTENTION: moving and positioning operations can be very dangerous if not performed with
the utmost caution. Send bystanders away; clear
the installation site; check the integrity and
suitability of the
tools and equipment
; do not touch the suspended loads and stay at a safe
distance from them; move the suspended loads at not more than 20cm height from ground;
carefully follow the instructions given below; in case of doubt do not persist.
For transport and volume reasons, the
hoist
is supplied partially disassembled. The different parts are joint
together to allow a safe transport and handling. Transport of the hoist must be performed by suitable
means. Avoid any damage during handling.
Lifting and handling
When loading/unloading or transporting the equipment to the site, be sure to use suitable loading
(e.g. cranes, trucks) and hoisting means. Be sure also to hoist and transport the components securely
so that they cannot drop, taking into consideration the package’s size, weight and centre of gravity
and it’s fragile parts.
Hoist and handle only one package at a time
Storage and stacking of packages
Packages must be stored in a covered place, out of direct sunlight and in low humidity, at a
temperature between -10
℃
and +40
℃
.
Stacking is not recommended: the package’s narrow base, as well as its considerable weight and size
make it difficult and hazardous.
Delivery and check of packages
When the
hoist
is delivered, check for possible damages due to transport and storage, verify that
what is specified in the manufacturer’s confirmation of order
or consigment number
. In case of
damage in transit, the customer must immediately inform the carrier of the problem.
Packages must be opened paying attention not to cause damage to people (Keep a safe distance
when opening straps) and parts of the
hoist
(be careful the objects do not drop from the package
when opening).
P
roduct description
The
hoist
is composed by four vertical posts and two platforms, which must be safely anchored to
the ground. The platforms are equipped with slide block with electro-hydraulic control system.
The
hoist
is operated by an electric motor controlling a hydraulic pump, which delivers the
hydraulic fluid to the cylinders at the bottom of the posts for lifting platforms with the sole
purpose of performing motor vehicle service, repairing and inspection.
7