A7 Engineering EmbeddedBlue 505, Руководство пользователя

Страница: 38 / 59

Command Set
Set Escape Character
The
set escape character
command provides control over the character used in the
Switch to Command Mode command to instruct the module to leave Data Mode and
enter Command Mode. The factory default escape character is the plus sign (+).
Syntax
set
escchar
character
[*]<CR>
Parameters
character
The character the module should recognize as the escape
character used in the Switch to Command Mode command.
* An optional parameter used to persist the new setting when
the module is powered down.
Example
>set escchar & *<CR>
ACK<CR>
>
Page 32
▪ EmbeddedBlue 505 User Manual