A7 Engineering EmbeddedBlue 505, Руководство пользователя

Страница: 43 / 59

Command Set
Set Security Mode
The
set security mode
command sets the module’s current security mode setting.
When security is turned off, the module will allow connections to be established by
any Bluetooth device. When security is set to open, the remote Bluetooth device is
required to provide a valid passkey before a connection can be established. When
security is set to closed, only existing trusted devices are allowed to establish
connections.
For maximum security it is recommended that the module be set to closed mode
whenever possible.
Syntax
set
security off | open | closed [*]<CR>
Parameters
off Turns security off allowing any Bluetooth device to establish
a connection.
open Configures the module to require other devices to provide
the correct passkey before establishing a connection.
closed Configures the module to only allow trusted devices to
establish a connection.
* An optional parameter used to persist the new setting when
the module is powered down.
Example
>set security open<CR>
ACK<CR>
>
EmbeddedBlue 505 User Manual ▪
Page 37